Lubricants

TSL Oil Fortifier

TSL is a pure liquid without solids such as PTFE (Teflon), MoS2 (molybdenum) or graphite, which can cake, clog and/or settle. TSL is fully absorbed by the oil and carried by the oil flow to the surfaces to be lubricated, where the electropolar molecules react under stress and form a synergetic bond with metal. This bond is virtually unbreakable. Surfaces lubricated in this way are thus impenetrable, smooth and stable, which will significantly reduce friction.

Excellent Qualities.

Fuel saving,  fuel and energy savings of 10% – 15% are possible. Many cases have proven this.
Lowers maintenance costs.  Reduces friction and consequently wear. Thanks  to TSL engines and machinery last  considerably  longer.
Protects against pollutants.  The unbelievably strong coating that TSL forms on the surface of the metal is not affected by pollutants.
Protects against temperatures of up to 315° C. Prevents damage due to cold starts. Scientific research has proven that 70% of the wear to the engine takes place during a “cold”start. TSL prevents this.

Applications

Petrol, diesel and gas-driven engines, generators, digging machines, cranes, tractors and other agricultural machinery, forklift trucks, hydraulic systems, pumps, compressors, bearings, differentials ( electrical/mechanical), transmissions, gear casings, hand-shifted gearboxes, 4×4 off-road vehicles, lawnmowers, chainsaws, inboard and outboard boat engines, motorbikes and Quads. NOT suitable for automatic gearboxes.

Use

TSL can be used in combination with any lubricating oil, including synthetic oils. For the first application in the crank-case use 50ml per liter and for further oil changes 30ml per liter. For any other application, e.g. hand-shifted gearboxes, gear casings etc. use 30ml per liter and repeat this with every following oil change.

TSL Lubricating Grease

TSL’s new generation polyurea has tested superior to all competitor’s leading high quality lithium complex greases. There was no comparison. TSL was the clear winner in all four important lab tests;
4-Ball E.P. Performance, Timken OK Load, Wheel Bearing Life Test, and Copper Strip Tarnish Test. Compared with lithium and lithium complexes, TSL polyurea grease lasts twice as long at high temperatures, performs better at low temperatures, resists water more effectively, and provides excellent shear stability. TSL EP Grease has earned a GC-LB Rating–the highest performance rating issued by the National Lubricating Grease Institute! With our superior shear stability, you can use it in your centralized lube system (even if exposed to very cold temperatures (-37°C)) and count on outstanding performance.

Benefits:
- Many times the life of ordinary lithium or lithium complex greases .
- Excellent extreme pressure capabilities.
- High drop point.
- Excellent rust protection.
- Environmentally friendly (free of heavy metals and chlorine).
- Excellent water resistance (better than lithium greases).
- Excellent low temperature properties.
- The most compatible grease on the market today.
- Mixable with all conventional greases

Application:
All chassis lubrication and wheel bearing applications, fifth wheel, high speed bearings, conveyors, crushers, mechanical presses, ball & U-joints, king pins, to name a few. TSL EP Grease has proven to meet or exceed the performance of other conventional and specialty greases. Recommended for “sealed for life” applications.